Energy Saving Boiler for Chemical Industries Waste Hot Smoke

Basic Info.

Style	Cast-In Type
Material	Steel
Transport Package	Naked Packing
Trademark	QD Hammer
Origin	Qingdao
HS Code	84195000
Production Capacity	10sets/Month

Product Description

Heat Pipe is both side sealed pipe ,which have easy evaporation medium inside ,and vacuum condition. pipe inside was treated to avoid any reaction with pipe. when heat the pipe evaporation section ,inside medium will collect the heat energy and become gaseous to go upto condensing section ,then release the heat energy and become soild medium again and fall down to pipe bottom again.
Heat Pipe have different fins based on the hot smoke element.and these fins can enhance the heat transferring efficiency more than 30%-80%.

Jet-flow pipe heat transferring efficiency is very high, normal heat pipe heat transferring rate :22W(M2.C),but Jet-flow pipe can increase to 52W(M2.C).
Jet-flow pipe through air spray to low down the pipe temperature , increase the pipe working life.and easy to clean dust,and hardly to block dust on it. and spray air can be heated to more than 600C, so it can sue for high smoke heat energy saving stage.

Heat Pipe steam generator widely use all kinds of Klin ,gas/oil engine,other waste hot smoke industries,We can design Heat Pipe steam generator based on the smoke element to saving energy and get more steam or hot water for clients.
Heat Pipe steam generator data(steam pressure 0.6mpa)

Exhuast smoke temperature ºC	16000-24000NM3/H	8000-12000NM3/H	4000-6000NM3/H
300ºC	1.1-1.4T/h steam	0.5-0.6T/h steam	0.4T/h steam
350ºC	1.35-1.8T/h steam	0.6-0.75T/h steam	0.5T/h steam
400ºC	1.6-2.16T/h steam	0.7-0.9T/h steam	0.6T/h steam

When Exhuast smoke 4000-6000NM3/H,temperature:300C, Profit: 0.55T/hX24T/HXUSD20X30DX12M=USD95040/Year.
When Exhuast smoke 8000-12000NM3/H,temperature:300C, Profit: 1.2T/hX24T/HXUSD20X30DX12M=USD207360/Year.